Tekstowy podgląd strony 103 (kliknij aby zobaczyć)
Adjusting the Digitizer
You need to adjust the digitizer when performing a hard reset, when the tapping operation or scrolling does not work properly, or when you cannot adjust the brightness of the backlight or screen contrast.
1
Tap V at the top right of the Preferences screen, and select [Digitizer].
The Digitizer calibration screen is displayed.
This Digitizer calibration screen is the same as the screen displayed when the first time you turned on your CLI� handheld. Follow the on-screen instructions to adjust the digitizer. Tip
Use the stylus perpendicularly to the screen to tap targets.
