Insert a recordable MD.
With the arrow pointing toward the deck.
Press H on the tape deck.
To stop recording
Press s on the MD deck. Tips
� If you use a partially recorded MD, recording starts after the recorded tracks. To erase the recorded contents, see �Erasing recordings� on page 31. � If the Smart Space function is on and there is no sound input for about 3 seconds or more (but less than 30 seconds) while recording, the MD deck replaces this silence with a blank of about 3 seconds and continues recording. However, this function may not activate if there is noise.
With the label side up, and the shutter on the righthand side.
2
Press A on the tape deck to open the cassette tray and insert a tape.
With the side you want to play facing up
Note
If the MD is record protected, �C11� and �Protected� appear alternately and the MD cannot be recorded. Remove the MD, then slide the record protection tab to the closed position (see page 11).
Press A again to close the cassette tray.
3 4
Turn FUNCTION until �TAPE� appears. Press z REC on the MD deck.
The MD deck stands by for recording.
Tape playback side
>>> appears for the front side, and <<< for the reverse side. To play the side not indicated, press s on the tape deck and remove the tape to reverse the tape side, then do steps 3 and 4 again.
