Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal
2-2. Chassis Removal
=>
=>
=>
<=
=> => =>
<=
Release the mains power cable from its securing posts. Remove the rear cover fixing screws indicated. Pull the rear cover away from the front beznet.
To remove lift the main bracket rear slightly and slide the chassis away from the beznet. Ensure that the interconnecting leads are released from their purse locks to prevent damage being caused.
2-3. A Board PWB Removal
2-4. Service Position
Clip.
Release the 5 securing clips located at the side and front of the chassis and slide the PWB clear of the bracket.
Place the A Board PWB in the position indicated to carry out servicing.
