Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Storing station names
� Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.
5
Press (ENTER).
Tips � Simply overwrite or enter �_� to correct or erase a name. � There is another way to start storing station names: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.
Storing the station names
Displaying the station name
Switch the display item to frequency or station name*. To Switch display item Press (DSPL) during radio reception
1 2
Tune in a station whose name you want to store. Press (MENU), then press either side of (DISC/PRESET) repeatedly until �NAMEEDIT� appears. Press (ENTER).
3
* If the station name is not stored, �NO NAME� appears in the display for one second.
Erasing the station name
1 4
Enter the characters. 1 Press the (+)*1 side of (DISC/PRESET) repeatedly to select the desired character. AtBtC�t0t1t2� t + t � t � t _*2 t A
During radio reception, press (MENU), then press either side of (DISC/PRESET) repeatedly until �NAME DEL� appears. Press (ENTER). Press either side of (DISC/PRESET) repeatedly to select the station whose name you want to erase. Press (ENTER) for 2 seconds. The name is erased. Repeat steps 3 to 4 if you want to erase other names. Press (MENU) twice. The unit returns to normal radio reception mode.
2 3
*
*1 For reverse order, press the (�) side of (DISC/PRESET). *2 (blank space)
4
2 Press the (+) side of (SEEK) after locating the desired character.
5
If you press the (�) side of (SEEK), you can move back to the left. 3 Repeat steps 1 and 2 to enter the entire name.
Note If you have already erased all of the station names, �NO DATA� appears in step 4.
