SONY CDX715
Instrukcja Serwisowa

SECTION 4 MECHANISMDECK ASSEMBLY
Note: Follow the assembly procedure in the numerical order given.

OPTICAL PICK-UP COMPLETE ASS�Y
1 Move the lever (LOCK 3) in direction A, and return it a little in direction B from the position where the chuck plate is moved down to the lower limit.

chuck plate
B A 4 stop ring 2.0 (E type)

5 tension spring (DH)

2 polyethylene washer

3 optical pick-up complete ass�y Note: Insert the shaft (A) first.

shaft (A)

GEAR (LOMINI) / (LOAD 1) ASS�Y
gear (LOAD 2)

2 Attach the gear (LOMINI) at the position shown in Fig. A.

gear (LOMINI) shaft (rotary prevention C) chuck plate
B 1 Move the lever (LOCK 3) fully in direction B to move the chuck plate up.

marking Fig. A.

slit
3 Attach the gear (LOAD 1) ass�y with its facing inside. 4 stop ring 1.5 (E type)

� 14 �